2005年08月05日
うごいた～
QuartusII5.0で合成し直したらあっさり動いてくれた。QuartusII4.1、この3ヶ月弱をかえせ～
Linux移植作業終了から半年、これで、やっと卒研完成だよ。
Linuxの移植だったはずなのに、LinuxのソースよりMPEのVerilogファイルいじってた時間の方が長かったよ。絶対。
initializing memory...
CPU revision is: 00000220
Primary instruction cache 0kB, linesize 0 bytes.
Primary data cache 0kB, linesize 0 bytes.
Linux version 2.4.29[MPE Linux 0.1] (ohara@walrus.arch.info.mie-u.ac.jp) (gcc バージョン 3.3.5) #58 2005年 5月 27日 金曜日 18:03:52 JST
Determined physical RAM map:
memory: 00600000 @ 00000000 (usable)
Initial ramdisk at: 0x800f1000 (524288 bytes)
On node 0 totalpages: 1536
zone(0): 1536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600
Calibrating delay loop... 1.88 BogoMIPS
Memory: 4452k/6144k available (813k kernel code, 1692k reserved, 580k data, 60k init, 0k highmem)
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
Dummy keyboard driver installed.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xbff003f0 (irq = 4) is a 16550A
ttyS01 at 0xbff002f0 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 512 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 512k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2005.02.02-07:02+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
/ # date
Sat Jan 1 00:00:10 UTC 2000
/ # mount -t proc none /proc
/ # cat /proc/cpuinfo
system type : MPE system
processor : 0
cpu model : R3000 V2.0
BogoMIPS : 1.88
wait instruction : no
microsecond timers : no
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
/ # cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 5144576 1269760 3874816 0 24576 827392
Swap: 0 0 0
MemTotal: 5024 kB
MemFree: 3784 kB
MemShared: 0 kB
Buffers: 24 kB
Cached: 808 kB
SwapCached: 0 kB
Active: 152 kB
Inactive: 684 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 5024 kB
LowFree: 3784 kB
SwapTotal: 0 kB
SwapFree: 0 kB
QuartusII5.0動くじゃん
データファイル(?)みたいなのをインストールしてなかった。
だからって落ちることないじゃん…
2005年08月03日
mpe_fpga_sram_30.sofが動かない
F_addrの代わりにim_paddrをBPB0に出すようにしたら、シミュレーションは動くが実機では動かなくなった。なぜ？
2005年08月02日
Quartus II 5.0
SunBlade2500(Solaris9)にQuartus5.0をインストール。
4.2のプロジェクトファイルを読ませると落ちる。
新規にプロジェクトを作ろうとしても落ちる。
つかえねー
コマンドライン版も落ちる。
つかえねー
[ohara@sunws2 single]$ /opt/altera/quartus/5.0/bin/quartus_sh -t mpe_fpga_sram.tcl | tee mpe_fpga_sram.log
Info: *******************************************************************
Info: Running Quartus II Shell
Info: Version 5.0 Build 168 06/22/2005 Service Pack 1 SJ Full Version
Info: Copyright (C) 1991-2005 Altera Corporation. All rights reserved.
Info: Your use of Altera Corporation's design tools, logic functions
Info: and other software and tools, and its AMPP partner logic
Info: functions, and any output files any of the foregoing
Info: (including device programming or simulation files), and any
Info: associated documentation or information are expressly subject
Info: to the terms and conditions of the Altera Program License
Info: Subscription Agreement, Altera MegaCore Function License
Info: Agreement, or other applicable license agreement, including,
Info: without limitation, that your use is for the sole purpose of
Info: programming logic devices manufactured by Altera and sold by
Info: Altera or its authorized distributors. Please refer to the
Info: applicable agreement for further details.
Info: Processing started: Wed Aug 3 17:09:03 2005
Info: Command: quartus_sh -t mpe_fpga_sram.tcl
Internal Error: Sub-system: DEV, File: ./dev_family_info_mgr_body.cpp, Line: 1860
Failed reading FGEN-generated ASCII family info data /opt/altera/quartus/5.0/h/dev_part_manager_auto.part
Stack Trace:
int err_get_call_stack(char*,int) +0x94 (/opt/altera/quartus/5.0/solaris/quartus_sh)
void MSG_INTERNAL_ERROR::report(const char*,const char*,const char*,int)+0x70 (/opt/altera/quartus/5.0/solaris/quartus_sh)
bool DEV_FAMILY_INFO_MGR_BODY::read_default_family_data() +0x198 (/opt/altera/quartus/5.0/solaris/quartus_sh)
bool DEV_FAMILY_INFO_MGR_BODY::load_data_from_pdb(const DEV_FAMILY_ENUM,const DEV_FAMILY_INFO_MGR_BODY::DEV_FAMILY_DATA_TYPE,const FIO_PATH*)+0x67c (/opt/altera/quartus/5.0/solaris/quartus_sh)
const DEV_FAMILY_DESC*DEV_FAMILY_INFO_MGR_BODY::get_desc_of(DEV_FAMILY_ENUM)+0xf0 (/opt/altera/quartus/5.0/solaris/quartus_sh)
bool DEV_FAMILY_MANAGER::test_trait_of(DEV_FAMILY_ENUM,DEV_FAMILY_TRAIT_ENUM)const+0x364 (/opt/altera/quartus/5.0/solaris/quartus_sh)
int IDU_PROJECT_INFO::get_support_level_for_feature(DEV_FAMILY_ENUM,e_IDU_FEATURE)+0xe8 (/opt/altera/quartus/5.0/solaris/libdb_idu.so)
GEN_EXE_RETURN_CODE flow_full_compile_or_simulate(FLOW_FACADE*,FLOW_INFO,bool,STL_VECTOR_
GEN_EXE_RETURN_CODE flow_full_compilation(FLOW_FACADE*,FLOW_INFO)+0x28 (/opt/altera/quartus/5.0/solaris/libsys_flow.so)
flow_execute +0xec (/opt/altera/quartus/5.0/solaris/libsys_flow.so)
flow_execute_flow +0x8bc (/opt/altera/quartus/5.0/solaris/libsys_flow.so)
TclInvokeStringCommand +0x7c (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
TclEvalObjvInternal +0x174 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
TclCompEvalObj +0xb98 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
TclCompEvalObj +0x17c (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
Tcl_EvalObjEx +0x60 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
Tcl_IfObjCmd +0x21c (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
TclEvalObjvInternal +0x174 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
Tcl_EvalEx +0x1c0 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
Tcl_FSEvalFile +0x1fc (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
Tcl_EvalFile +0x24 (/opt/altera/quartus/5.0/solaris/libtcl8.4.so)
void qexe_argfile_lexer_remove_escapes(char*) +0x2f80 (/opt/altera/quartus/5.0/solaris/quartus_sh)
void qexe_argfile_lexer_remove_escapes(char*) +0x49c (/opt/altera/quartus/5.0/solaris/quartus_sh)
void qexe_argfile_lexer_remove_escapes(char*) +0x1ac (/opt/altera/quartus/5.0/solaris/quartus_sh)
int qexe_standard_main(QEXE_FRAMEWORK*,const QEXE_OPTION_DEFINITION**,int,const char**)+0x14 (/opt/altera/quartus/5.0/solaris/quartus_sh)
int qsh_main(int,const char**) +0x64 (/opt/altera/quartus/5.0/solaris/quartus_sh)
int msg_exe_main(int,const char**,int(*)(int,const char**)) +0xa0 (/opt/altera/quartus/5.0/solaris/quartus_sh)
_start +0x108 (/opt/altera/quartus/5.0/solaris/quartus_sh)
End-trace